2010 Explorer Sport Trac Roof Rack - Yakima StreamLine with CoreBar - Complete System for Raised Rails

customer rated 9.7 out of 10
Change Year: 2007 2008 2009
Checking Stock
Fit Notes
  1. Requires factory raised rails
you can slide your hand under raised roof rails
Raised roof rail
you CANNOT slide your hand under raised roof rails
Flush roof rail
CargoGear Item#:  YKSLTCBFOST10
Yakima Parts: 8000147, 8000421
Thule SnowPack 6 - 7326
Rhino-Rack Ski Carrier for Roof Rack - Large - Black
Yakima SKS Lock Cores, 4-pack keyed alike
Yakima's Streamline complete crossbar system for a 2010 Ford Explorer Sport Trac with raised rails. This Streamline System is designed for raised factory rails on the 2010 Ford Explorer Sport Trac. The TimberLine Towers are specifically designed to fit these rails, providing the proper foundation to support all sorts of cargo, from large to small. Each TimberLine Tower has a rubber coated steel strap that wraps around the rails and fastens tightly into position. Combined with the aerodynamic Yakima CoreBars, the Timberline Towers create a complete base system that supports a variety of bike, ski, kayak and other sporting gear and cargo carriers. The CoreBar crossbars are made of hollow galvanized steel, and are molded to an aerodynamic shape to reduce wind noise. These two products are built around a simple notion of ensuring satisfaction, through simple design and tough material. The TimberLine Towers are also SKS lock compatible, but locks are sold separately. The load capacity of this crossbar system on a 2010 Explorer Sport Trac is 165 lbs with a maximum bar spread of 30 inches.
  • Aerodynamic steel load bars
  • Attached to raised factory rails of 2010 Ford Explorer Sport Trac
  • Includes four (4) Corebar end caps and Corebar Adapter for TimberLineTowers
  • Compatible with Yakima SKS Locks & Keys (Sold Separately)
  • Yakima's limited lifetime warranty
Yakima Fit Notes:
  • HighRoller requires one set of MightyMount 39H (PN 8003539) to be compatible with Yakima CoreBar and JetStream bars.
  • HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (PN 8003539) to be compatible with Yakima CoreBar and JetStream bars.
  • Refer to current Yakima Fit List, current Whispbar Compatibility Guide or visit http://www.yakima.com/download/Yakima-Hatch-Interference.pdf for rear hatch clearance information regarding cargo boxes.
  • For rear hatch clearance information regarding cargo boxes, refer to http://www.yakima.com/download/yakima-hatch-interference.pdf
  • All loads extending beyond the length of the roof (except cargo boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
  • If crossbar spread is between 24 and 29, length of canoe must be 14 feet or less
  • Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap.
  • Any load/mount extending beyond the rear hatch seam may cause interference.
  • Boa bike mount will not work due to crossbar spread limitations.
  • Limited to 2 surf/sail/paddleboards. Boards must be stacked - NEVER carry side-by-side.
Manufacturer's part numbers: 8000147, 8000421

View Cart.View Cart
menu close menu